Product Description
These steppers have a threaded shaft, which allows them to be used as a linear actuator. As the motor runs, it moves along the shaft at a specific rate of 1cm per 5 full rotations. These are a good choice for linear motion where precision and repeatability are important.
Note: It looks like the datasheet for this stepper may not be accurate. When connecting this motor to a bi-polar driver you'll want to wire it according to the wiring diagram in the documents below.
Features:
- Step Distance: 0.01mm
- 2-Phase
- Rated Voltage: 12V
- Rated Current: 0.4A/Phase
- 100mm Long Threaded Shaft (keyed on one end)
- Holding Torque: 21 N.cm
- 6-Pin Wiring Harness Included
29oz Linear Stepper - $27.99 |
Product Description
These steppers are a great way to get things moving, especially when positioning and repeatability is a concern.
Features:
- Step Angle (degrees) : 0.9
- 2-Phase
- Rated Voltage: 3V
- Rated Current: 1.7A/Phase
- 5mm Diameter Drive Shaft
- Holding Torque: 48N.cm
- NEMA 17 form factor
68oz Stepper - $14.99 |
Product Description
These steppers are a great way to get things moving, especially when positioning and repeatability is a concern.
Note: This is a uni-polar stepper, meaning that if you are going to drive it with a bipolar stepper driver, you can ignore the yellow and white leads and drive it using the remaining four.
Features:
- Step Angle (degrees) : 1.8
- 4-Phase
- Rated Voltage: 3V
- Rated Current: 2A/Phase
- 1/4" Diameter Drive Shaft
- Holding Torque: 90N.cm
- NEMA 23 form factor
125oz Stepper - $21.99 |