 |
The Endurance R/C ServoCommander software was designed to allow input devices like head trackers, mice, keyboards, and joysticks to control standard R/C equipment like servos and transmitters. When used with the PCTx or 25 Servo Controller the software allows joystick axes, buttons, sliders, and dials to be mapped to R/C servos and motor controllers. Anything that can be attached to an R/C receiver or servo controller can be configured and controlled with ServoCommander. The software supports all windows joysticks and input devices including game pads, joysticks, game wheels as well as the z800 headset and mouse. There is even a web interface that can be used to control a remote PCTx or 25 Servo Controller over the internet!
Servo CommanderNew version released 6.28.08 - v1.2.1
How it works
Many modelers and professionals have often sought out alternate ways to control an R/C vehicle or robot. The ServoCommander software allows you to use a joystick, game wheel, or even Xbox game controller to control your R/C electronics. Imagine having the ability to do First person R/C flight while also having the ability to control your plane with a realistic flight control system.
Animatronics engineers and robotic combat participants can also benefit from the quick setup and ease of use of the software for controlling robotic and animatronics applications.
eMagin Z800 Head mount display
See the User Projects section for some user creations using the PCTx and ServoCommander software.
Fully Configurable Software
The ServoCommander software was created with flexibility in mind. Any R/C vehicle or robotic application can be setup by adjusting end and mid points for the control channels. Invert channels and set sensitivity for steering, throttle, and head movements to fit your personal comfort levels.User profiles, which contain particular configuration data, can be saved and imported in seconds.
 Pan and Tilt camera installed in an HPI eSavage |
Features
- Servo mid and end point adjustments
- Servo inverting
- Axis sensitivity adjustments
- On-the-fly calibration
- Software channel selection
- Joystick to channel mapping
- Mouse input
- Servo output delaying
- Mixing
- Multiple servo to channel output
- Configuration for any DirectInput joystick and custom joysticks via the Endurance R/C Analog Reader
- Load/Save profiles
- Compatible with the eMagin z800 headset
- Web Interface for remote PCTx or Servo Controller control
- Center headset via joystick buttons
- Keyboard - Map up to 5 keys
- Tank control - Use a joystick to drive a tank style vehicle
- Joystick Calibration
Requirements
- PCTx or Endurance R/C 25 Servo Controller (9 channels)
- Joystick, Game pad, mouse, etc.
- PC running Windows XP or Vista
- 2 PC's and internet connection for web interface
- Important Note: This software is not compatible with eMagin z800 version 63e firmware. An upgrade chip can be obtained from eMagin's web site. Support can also be obtained via 3rd party software like PPJoy.
Compatibility
Controllers:
ServoCommander is compatible with the Endurance R/C PCTx and Servo Controllers only. Controllers from other manufacturers are not compatible.
USB Analog Reader:
Custom joysticks and even sensor input can be added to ServoCommander with the use of the Endurance R/C Analog Reader. The Analog Reader will show up as a standard DirectInput joystick to ServoCommander and can be configured just like any other compatible device. For more info check out the custom input joystick controlling a robot arm video and the tutorial on how it was created. See it here:
Custom input device controlling a robotic arm
Joysticks/Input Devices:
All mice and keyboards can be read by ServoCommander. Any DirectInput joystick can also be read by ServoCommander but if you are uncertain if your Joystick or game pad is a DirectInput device you can use the following test application to determine this.
eMagin z800:
Due to different firmware versions some z800 versions may be incompatible with ServoCommander. Before purchasing ServoCommander you can use the following test application from eMagin to determine compatibility.
Instructions:
 |
Click here to view in MS Word format |
 |
Click here to view in PDF format |
ServoCommander software - $99.99 |
|
| Software only. Requires a PCTx interface or 25 Servo Controller. | |
ServoCommander software + PCTx - $149.99 |
|
| Software + PCTx | |
ServoCommander Joystick System (No HeadTracking)- $364.99 |
|
| Includes the ServoCommander software, PCTx, Logitech Attack 3 Joystick, Futaba 4YF Transmitter and receiver, PT-1 pan and tilt base with 2 standard servos, wireless cmos camera | |
Complete Solution w/Head Tracking System- $2049.99 |
|
| Full System! Includes ServoCommander software, PCTx or 25 Servo Controller, Futaba 4YF 4 channel transmitter, eMagin z800 HMD with head tracking support, Logitech Attack 3 joystick, Wireless cmos camera, PT-1 Pan and Tilt base with 2 standard servos, AV Tool composite to VGA converter |
Custom orders are welcome! If the above features do not suit your needs please contact sales@endurance-rc.com and let Endurance R/C put together a custom solution for you.
