OSD's and Flight Loggers by Eagle Tree
OSD || eLogger || GPS Expander || Altimeter || Air Speed Indicator
See the OSD FAQ here
See the OSD FAQ here
Display live GPS data, airspeed, temperature and many more.
OSD display options:
- Electrical Parameters (Pack Volts, Amperage, RX Volts, Servo Current, Milliamp-Hours, Watts)
- Performance Parameters (Airspeed, Barometric Altitude, Climbrate, Variometer, Temperatures, RPM, G-Force, EGT, Jet ECU Status, servo positions)
- Receiver Health (Dropped Frames, Antenna Fades, Missed Packets - requires Spektrum or JR FlightLog compatible Receiver)
- And many more
Features:
- Upgradeable firmware
- PC configurable
Requirements:
- Eagle Tree eLogger or other data recorder
- NTSC, PAL or SECAM video camera with video output, a wireless video transmitter/receiver and/or a Digital Video Recorder.
Instructions:
 |
Click here to view in PDF format |
Manufacturers Web Site:
Log or display(with OSD) live flight data!
Technical specifications:
- Logs pack current to +/- 100 amps (150 amps optional) and voltage from about 4.5 volts to 70 volts.
- Each unit is calibrated on a custom built calibration machine for the best accuracy.
- The eLogger V3 has 4x the memory capacity of the V2 (128KB).
- Current is measured with a true Hall Effects Sensor - NOT a resistance shunt which produces heat and sucks power from your system!
- Great for bench monitoring of battery charging also!
- Accepts optional inexpensive sensors for GPS, Temperature, RPM (brushless, magnetic or optical), Airspeed, Altitude, Servo Current, and more, available below
- Logs Throttle Movement with optional Y-Cable
- All data is logged to permanent memory, which retains the data even when the power is removed.
- Software computes Wattage, mAH, etc. for complete e-flight data.
- Fully Compatible with Windows Vista, 98SE, ME, Win2K and XPT
- Integrated USB with included cable (NOT a USB to serial port cable like other loggers)
- Weighs about 0.7 oz (20 grams). Version with Wire Leads weighs slightly more.
- Supports USB Live Mode, which lets you see what's happening in the model LIVE on the bench, on your PC
- Adjustable logging rate (1-10 samples/second) and lossless data compression for long log times
- Comes with our state of the art Windows virtual playback display and graphing
- Powerful Graphing software has advanced charting features, such as amps vs volts
- Internet Updatable firmware - as we add new features or (heaven forbid) have a firmware bug, the update is just a download away! No need to ship hardware back and forth.
- Full support for English and Metric units
Instructions:
|
Click here to view in PDF format |
Manufacturers Web Site:
Monitor global position data. For use with the eLogger and/or OSD board.
Technical specifications:
- Plugs into the eLogger V3 to provide live and/or recorded lat/lon
- ground speed
- GPS altitude
- distance to pilot
- course
- UTC timestamp
- Integrated display/3D graphing software included in data system
- WAAS and EGNOS compatible
- 5Hz update rate
- built-in patch antenna.
Manufacturers Web Site:
Accurate altitude sensor for use with the eLogger and OSD.
Technical specifications:
- Plugs into the eLogger V3 to provide live and/or recorded altitude readings
- Lowest cost standalone Altimeter on the market!
- Approximately 3 foot (1 meter) resolution
- Weight 4 grams (0.15 oz)
- Precalibrated - no user calibration required
- Accessible static port
- Metric or English units
Manufacturers Web Site:
Accurate airspeed sensor for use with the eLogger and OSD.
Technical specifications:
- Plugs into the eLogger V3 to provide live and/or recorded altitude readings
- Lowest cost standalone Altimeter on the market!
- Approximately 3 foot (1 meter) resolution
- Weight 4 grams (0.15 oz)
- Precalibrated - no user calibration required
- Accessible static port
- Metric or English units
Manufacturers Web Site:
