ParkBEC - $16.95 |
Model Dimension Engineering ParkBEC
Parkflyer Switch-mode BEC
Product Description
The ParkBEC is the smallest and lightest switch-mode BEC on the market. ParkBEC powers your receiver and servos much more efficiently than a standard BEC. As many as six sub-micro servos can be powered without worrying about an overheating BEC. ParkBEC works great up to very high voltages, and is especially suited for running parkflyer type aircraft. ParkBEC is often a necessity at 4s and above.
Many people don't realize that their ESC's BEC rating is misleading. With the linear BEC built into most speed controls, the current rating decreases as pack voltage increases. For example, several popular 25A ESC's with "3A" BEC's are only capable of supplying 0.5A when running from a 3s pack. Because it is an efficient switching regulator, ParkBEC can supply its full rated current of 1.25A all the way up to 8s.
ParkBEC was carefully designed to not create radio interference. It uses a shielded inductor and optimized layout, so you can use it without fear of glitching.
The ParkBEC installs between your ESC and receiver, so you don't have to modify your speed control to disable its internal BEC. Just plug ParkBEC in!
ParkBEC is designed for use with lithium aware ESC's. If your ESC does not have a setting for high voltage lithium packs, please use the Dimension Engineering SmartBEC which includes an integrated lithium cutoff to protect your flight pack.
For best results, ensure that the ParkBEC is installed at least 2 inches away from your receiver and antenna.
ParkBEC cannot power multiple digital servos.
Product Specs
- Specifications: Input voltage: 6V to 33.6v (2s-8s lithium, up to 21 NiMHs)
- Output current: 1.25A continuous, 1.5A 60 second peak. (6 4-9g servos, 4 standard servos)
- Weight: 6.2g/.22oz
- Weight Without Wires: 4.1g/.14oz
- 5 Volt output
- Universal connector fits all receivers
- 1.3V dropout voltage at 1A
- Can be put in parallel
Applications
- Parkflyer's
- Small 3d aircraft
- Micro helicopters
- Robots
Manufacturers Web Site:
http://www.dimensionengineering.com
ParkBEC - $16.95 |
ParkBEC 6V- $17.95 |
Model Dimension Engineering ParkBEC 6V
Parkflyer Switch-mode BEC 6V
Product Description
The ParkBEC 6V is the 6 volt output version of our ParkBEC, the smallest and lightest switch-mode BEC on the market. The 6 volt output will give you more servo speed and torque than standard 5V models. It can support as many as six sub-micro servos.
ParkBEC 6V is especially well suited for small helicopters and 3d planes, where extra response speed or torque are needed.
It weighs only 6.5g and is designed for running parkflyer type aircraft with pack voltages up to 33.6V.
The ParkBEC 6V installs between your ESC and receiver. You don't have to modify your speed control to disable its internal BEC, just plug the ESC into the ParkBEC 6V. It uses a switching type power supply to efficiently convert high pack voltages into a steady 6 volts.
Additional notes
The ParkBEC 6V is designed for use with lithium aware ESC's. If your ESC does not have a setting for high voltage lithium packs, please use the Dimension Engineering SmartBEC.
If you are using small servos make sure they can run at 6v. Some sub-micros, notably the Hitec HS-50, can be damaged by a 6v supply.
For best results, ensure that the ParkBEC 6V is installed at least 2 inches away from your receiver and antenna.
ParkBEC 6V is not compatible with 2s lithium packs.
ParkBEC 6V cannot power multiple digital servos.
Product Specs
- Specifications: Input voltage: 8V to 33.6v (3s-8s lithium, up to 21 NiMHs)
- Output current: 1.25A continuous, 1.5A 60 second peak. (6 4-9g servos, 4 standard servos)
- Weight: 6.5g/.23oz
- Weight Without Wires: 4.4g/.16oz
- 6 Volt output
- Universal connector fits all receivers
- 1.3V dropout voltage at 1A
- Can be put in parallel
Applications
- Parkflyer's
- Small 3d aircraft
- Micro helicopters
- Robots
Manufacturers Web Site:
http://www.dimensionengineering.com
ParkBEC 6V- $17.95 |