Analog Reader AccessoriesLarge Wired 10k Pot || Wired Temp Sensor || 16 Button Pad || 20 Pin Ribbon Cable |
Wired 10K Pot - $4.99 |
Compatible with the Endurance R/C AnalogReader. Can also be used with many other applications.
Wired 10K Pot - $4.99 |
Wired Temp Sensor- $4.99 |
This is a wired temp sensor based on the LM235. The sensor is wired up and ready to be used with the AnalogReader or other 5v devices. Comes complete with a JR servo plug.
 |
Uses
- Home automation
- Testing/Lab uses
- Weather station
Description:
The LM235 is a precision temperature sensors which can be easily calibrated. It operates as a 2-terminal Zener and the breakdown voltage is directly proportional to the absolute temperature at 10mV/°K.
Features:
- Directly calibrated in °K
- 1°C initial accuracy
- Operates from 450ľA to 5mA
- Less than 1O dynamic impedance
Compatibility
Compatible with the Endurance R/C AnalogReader. Can also be used with other 5v reader devices.
Wired Temp Sensor- $4.99 |
16 Button Pad - $14.99 |
This board can be used as a button pad input for the Analog Reader 2 or used for you own project requiring a button pad. The board features 16 non-multiplexed buttons for best performance.
 |
Uses
- 16 Button Input for Analog Reader 2
- Button Pad input for your own project
Features:
- 16 Non-Multiplexed buttons for best performance
Compatibility
Compatible with the Endurance R/C AnalogReader 2.
16 Button Pad - $14.99 |
20 Pin Ribbon Cable - $4.99 |
Compatible with the Endurance R/C AnalogReader 2.
20 Pin Ribbon Cable - $4.99 |
